Category: Chemical Engineering Thesis Topics

Dehydration of Ethanol Water Solution Using Activated Starch   Abstract of Dehydration of Ethanol Water Solution Using Activated Starch This project research work was based on dehydration of ethanol water solution using activated starch. The extracted starch obtained was of whistler method. The starch obtained from potato was weighed with…

Process and Quality Factors in Laundary and Toilet Soap Production   Abstract of Process and Quality Factors in Laundary and Toilet Soap Production This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection.  Various factors affected the quality of the soap produced.  These…

Report on Fabrication of Flow Nozzle   Abstract of Report on Fabrication of Flow Nozzle The flow nozzle was constructed based on the dimensions and specifications of the international standard organization (I.S.O) recommendation. Throat diameter 42.5mm Length converging nozzle 68mm Thickness of nozzle 2mm Diameter of major axis of ellipse…

Extraction of Wax From Cocoa Pod                            Chapter One of Extraction of Wax From Cocoa Pod INTRODUCTION The word wax describes a large variety of substances of plant and animal origin, as well as man made products which are mostly petroleum derivatives. However, natural waxes are not single substances, but…

Construction of Kerosine Cooking Stove   Abstract of Construction of Kerosine Cooking Stove The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The…

Construction of Soap Cutting Device   Abstract of Construction of Soap Cutting Device The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes. Soap cutting devices are used to size reduce…

Construction of Simple Distillation Unit   Abstract of Construction of Simple Distillation Unit Distillation unit is the judgment used for the separation of liquid mixture depending on the volatility of the component. It has the top section and bottom section. In the top section this is where more volatile component…

Construction of Propeller Agitator   Abstract of Construction of Propeller Agitator The construction of propeller agitator used for agitating and mixing of low viscous fluid was fabricated in the mechanical workshop of the institute of management and technology Enugu. In the construction, galvanized mild steel was chosen due to its…

Construction of Simple Metallic Mould                            Chapter One of Construction of Simple Metallic Mould INTRODUCTION The equipment mostly used in the industries and manufacturing establishments requires the production of definite shape, pattern, different design, embossments and others, are usually moulds.  The ability of moulds to withstand pressure, distortion and corrosion…

The Construction of Sand Filter for Portable Water Filtration With Stainless Steel Material   Abstract of The Construction of Sand Filter for Portable Water Filtration With Stainless Steel Material The project constructed was sand filter; equipment for portable water filtration.  This was constructed using a mild steel material.  This was…